搁颈苍驳办补蝉补苍：Dalam pengembangan tambang, Mesin Raymond adalah peralatan pengolahan batu yang sangat penting. Tergantung pada ukuran produksi, ada perbedaan antara penggunaan

Dalam pengembangan tambang, Raymond Mill adalah peralatan pengolahan batu yang sangat penting. Tergantung pada ukuran produksi, ada perbedaan antara penggunaan jalur produksi besar dan peralatan Raymond mill kecil. Dalam proses pengolahan bahan bijih kami, sangat penting untuk memasang dan menyetel peralatan Raymond mill. Di sini, Xiao Bian secara singkat merangkum poin-poin yang perlu diperhatikan.
Pertama-tama, kita harus membiarkan teknisi profesional memasang gilingan Raymond kecil yang baru dipasang dengan benar, agar terhindar dari kerusakan komponen selama proses instalasi atau masalah pemasangan yang tidak tepat dan memengaruhi produksi penggilingan selanjutnya.
Secondly, in the commissioning operation stage of the installed small Raymond mill, it should be divided into two stages: no-load operation and load operation. In the small Raymond grinding load operation test machine, the Raymond mill's grinding roller device should be fastened with the wire rope to prevent the grinding roller ring ring contact impact with the operation of the small Raymond mill. At the same time, it should be noted that the empty running test machine should not be less than 1 hour, and ensure that the main engine is running smoothly and orderly, so that the oil temperature in the tank is kept below 80 °C, and the temperature rise should not exceed 40 °C.
Ketiga, saat kita bekerja pada operasi pengisian Raymond mill kecil, kita harus memperhatikan fenomena abnormalitas suara dan getaran setelah pabrik bekerja normal, sehingga memastikan tidak ada kebocoran udara pada sambungan setiap pipa. Setelah mesin uji selesai, kencangkan kembali setiap pengencang.
Fourth, when we are debugging the operation of the small Raymond mill, we must pay attention to the air blower to start the air load, and then load it after the equipment is running normally. At the same time, observe the smoothness of its operation. Under the condition of ensuring no abnormal sound and vibration, the maximum temperature of the rolling bearing is not higher than 70 °C, and the temperature rise is not more than 35 °C.
Fifth, in the installation and commissioning of the small Raymond mill, the lower the working height of the pressure spring, the stronger the rolling capacity of the low roller of the grinding roller, and the higher the output of the equipment. Therefore, in the process of using small Raymond mills, we must pay attention to controlling the working height of the pressure springs, generally between 200-210 mm.