麻豆社

Summary: in the actual production, there are many factors related to the output of 砂製造机 such as: the hardness of material, humidity, finished sand fineness, equipment quality, and so on....

Many users always complain about the low output of their 砂製造机 after purchase and want to know the reason. In actual production, there are many factors affecting the output of the 砂製造机, such as material hardness, moisture content, finished sand fineness, equipment quality, and so on. But 7 of them are the most crucial. The details are as follows:

1. 異なる原材料

Different raw materials have different hardness, viscosity and humidity. So the output of the 砂製造机 will also be different according to the different materials.

• 1) 材料の粘度
  The greater the material viscosity, the easier it is to adhere. 材料 with high viscosity will adhere to the inner wall of sand chamber in 砂製造机. If not cleaned in time, the working efficiency of 砂製造机 will be seriously affected and even the normal operation of 砂製造机 will be affected. Therefore, it should be noted that the material viscosity should not be too large.
• 2) 粉末含量
  

  The higher the powder content in the material, the more it affects sand production, because these fine powders are easy to adhere and affect transportation. Therefore, the material with more fine powder content should be screened in advance, and the fine powder should be screened out from the material as far as possible, so as not to affect the work of 砂製造机.

• 3) 材料湿度
  

  When the material is crushed in the 砂製造机, materials with higher water content are easy to adhere, which may cause blockage and delivery failure, resulting in reduced output of the 砂製造机. So when selecting materials, the humidity of materials should be strictly controlled. If its humidity is too high, we can reduce the moisture in materials by sun or air drying.

• 4) 材料硬度
  

  The harder the material, the harder it is to sand and the faster the equipment wears down. This shows that we should select materials of moderate hardness.

2. 制砂生产线设计

The output is also related to the equipment in the whole production line. The configuration of a production line should consider all factors comprehensively. For example, if you want to produce 500 tons of sand an hour, it cannot only require the output of 砂製造机 to reach 500t. その他 equipment like jaw crusher, cone crusher, belt conveyor and so on should be matched to work together. Otherwise, that is unable to meet the production requirements.

3. 機械の種類

Each type of 砂製造机 produced by various manufacturers comes in different sizes and specifications. The capacity and power of different types of equipment are not the same. When purchasing equipment, we should have an understanding of their basic production or you may get a wrong product which not only affect the output, but may cost you higher.

4. 机器质量

Sand making machine with high quality not only has advantages on comprehensive performances, but has advantages on energy saving and environmental protecting. It can easily achieve the expected output. Because this kind of equipment is made of new wear-resistant materials and advanced production technology, it can well meet production needs.

5. 叶轮速度

在垂直轴冲击破碎机中，材料的输入尺寸与转子线速度之间存在关系。

Under the same working conditions, if the particle size of the raw material is larger, the linear speed of the crusher rotor will be lower. Therefore, under the same condition of particle size, water content and feed amount of incoming material, the rotor speed (linear speed) of 砂製造机 can be appropriately increased. It is thus no surprise to help raising production.

6. 标准操作与定期维护

It is very important to maintain proper operation and regular maintenance of the machine, as this also affects the sand output.

Continuous and uniform feeding can not only ensure normal production, but improve the productivity. If users do not perform regular maintenance, it will cause wearing parts to wear faster and greatly reduce the equipment life, all of which leads to low output.

7. 仕上げ砂の細かさに関する要件

This is also for a special reason. The greater the fineness requirement (the finer the finished material), the smaller the sand production capacity. This is up to what kind of fineness you want.

In conclusion, that 砂製造机 can't reach the original output is related to the above 7 factors. So when choosing a machine, users need to consider their own conditions. We believe that as long as these factors are taken into account—selecting the right equipment, correct operation, and frequent inspection and maintenance—sand production can be effectively improved.