厂耻尘尘补谤测：Output dan kehalusan kilang adalah dua aspek penting yang mempengaruhi keuntungan barisan pengeluaran. Output merujuk kepada kuantiti produk siap

Keluaran dan kehalusan pengisar adalah dua pautan yang amat penting yang mempengaruhi keuntungan barisan pengeluaran. Keluaran ialah kuantiti produk siap per unit masa, dan kehalusan menentukan sama ada produk siap boleh digunakan dengan lancar dalam pengeluaran pelbagai industri. Malah, terdapat hubungan yang rapat antara hasil dan kehalusan. Berikut adalah pengenalan ringkas tentang hubungan antara kedua-duanya.

Bagi peralatan pengisar kilang, dalam pengeluaran bahan, bukan sahaja pengeluaran penting, tetapi juga kehalusan serbuk siap penting, kerana kedua-duanya menentukan pendapatan keseluruhan garisan pengeluaran, dan kedua-duanya juga mempunyai hubungan yang erat antara satu sama lain. Berikut adalah pengenalan ringkas kepada hubungan erat ini.

Melalui analisis proses pengeluaran mesin pengisar, dapat diketahui bahawa apabila output tinggi, zarah serbuk siap lebih besar, dan apabila serbuk siap lebih halus, output peralatan lebih rendah, iaitu, kehalusan serbuk siap berkadar songsang dengan saiz kapasiti pengeluaran. Jadi mengapa demikian?

 When the mill grinds the material, if the required fineness of the finished product is high, then the speed of the analyzer inside the mill is relatively high, which makes the coarser analysis after the grinding cannot pass, and needs to be re-ground. This extends the time of the powder inside the mill, which means that the amount of finished powder discharged by the mill per unit time is reduced, so its productivity is reduced. Similarly, when the fineness of the powder is low, analysis The machine speed is slow, most of the powder can pass, so there is more finished powder discharged per unit time, so the output is higher.

Production is one of the most concerned issues for customers. In the production of mills, because the size of the production is closely related to the fineness of the powder, it is not possible to pursue the size of the production capacity, but also to take into account the size of the finished particles. Appropriate finished products can meet the needs of the market. From this aspect, it can be seen that the decline in output is not only caused by the problems of the equipment itself, but also caused by factors such as operation, which may be caused by changes in the fineness of the finished product. In actual production, when there is a phenomenon of a decline in production, it is necessary to make a careful judgment.