麻豆社

Muhtasari:Njia bora ya kupunguza uchafuzi wa kelele wa mashine ya kuvunja mandibula ni kuongeza ukubwa wa koni ya ond ya mashine, lakini kufanya hivyo kunaweza kufanya kazi kuwa ngumu kwa wafanyakazi.

Njia bora ya kupunguza uchafuzi wa kelele wa mashine ya kuvunja vipande ni kwamba ukubwa wa koni ya ond ya mashine hiyo ni kubwa, na kwamba wafanyakazi huwa na ugumu wa kuishughulikia, na makosa mengine hutokea wakati wa uendeshaji. Vipengele vya mashine kama vile koni ya ond, gia la nyundo, mhimili unaozunguka kwa usawa, sleeve isiyo sawa na mhimili mkuu vina tofauti kubwa wakati wa ufungaji. Mazingira ya utengenezaji wa mashine hiyo ni mabaya, ambayo husababisha gia kuzunguka katika meno na kuongeza msuguano. Sleeve isiyo sawa na mhimili unaozunguka kwa usawa utazunguka bila usawa.

麻豆社'crushers are mainly used as coarse crusher and medium crusher in mining, building materials and infrastructure. According to the width of the feed port, it is divided into three types: large, medium and small. The feed port width is larger than 600MM for large machines. The feed port width is 300-600MM for medium-sized machines. The feed port width is less than 300mm for small-sized machines. Machine, the highest compressive strength of the crushed material is 320Mpa. The jaw crusher is simple in structure, easy to manufacture and reliable in operation. The working part of the jaw crusher is two jaws, one is a fixed jaw (fixed), the vertical (or the upper end is slightly inclined) fixed on the front wall of the body, and the other is the movable jaw (moving), the position Tilting, forming a large and small crushing cavity (working cavity) with the fixed jaw. The movable jaws periodically reciprocate against the fixed jaws, sometimes separated and sometimes close. When separated, the material enters the crushing chamber, and the finished product is discharged from the lower portion; when it is close, the material between the two jaws is crushed by bending, bending and splitting.