厂补尘别苍惫补迟迟颈苍驳：Om de raymond-molen goed te laten functioneren, moet een systeem voor "veilige werking tijdens onderhoud" worden vastgesteld om de lange termijn veilige werking van de molen te garanderen. Noodzakelijke onderhoudsgereedschappen, vet en bijbehorende accessoires zijn eveneens vereist.

1. Om de raymond-molen goed te laten functioneren, moet een systeem voor "veilige werking tijdens onderhoud" worden vastgesteld om de lange termijn veilige werking van de molen te garanderen, en noodzakelijke onderhoudsgereedschappen, vet en bijbehorende accessoires.
 2. During the use of Raymond mill, there should be fixed personnel responsible for the care, the operator must have a certain level of technology. Before the installation of the mill, the operator must carry out the necessary technical training to understand the principle performance of the mill and familiar with the operating procedures.
 3. After using the Raymond mill for a period of time, it should be repaired and repaired. At the same time, the wearing parts such as the grinding roller and the blade should be repaired and replaced. The grinding roller device should be carefully checked before and after use to see if it is checked. There is looseness, and the grease is added.
 4. When the grinding roller device is used for more than 500 hours to replace the grinding roller, the rolling bearings in the roller sleeve must be cleaned, and the damaged parts should be replaced in time. The fueling tool can be manually pumped and greased.
 5. The bearings are lubricated with No. 1 MOS2 grease or ZN-2 sodium bitter grease.
 6. Malen roller bearings are refueled once per shift. The main center bearings are added once every 4 shifts, and the blower bearings are added once a month. The maximum temperature rise of the bearing shall not exceed 70 °C. When the bearing is overheated, the accessories such as the cleaning bearing and the bearing chamber shall be removed and cleaned once.